- Fire Detection & Alarm System
- Fire Protection System
- HVWS & MVWS System
- Aspiration Detection System (VESDA)
- Linear Heat Sensing Cable
- Public Address System
- Gas Based Suppression System
- Cord / Sticker / Tubed Based Suppression System
- Aerosol Based Suppression System
- Access Control System
- Building Management System
- CCTV System
- Home Automation System
Call Us on 24/7
Contact us at the office nearest to you
033 29725520
Quick Contact
Stay Secured from Fire Harms
A fire fighting system is probably the most important of the building services, as its aim is to protect human life and property, strictly in that order.
It consists of three basic parts:
- a large store of water in tanks, either underground or on top of the building, called fire storage tanks
- a specialised pumping system,
- a large network of pipes ending in either hydrants or sprinklers (nearly all buildings require both of these systems)
A fire hydrant is a vertical steel pipe with an outlet, close to which two fire hoses are stored. During a fire, firefighters will go to the outlet, break open the hoses, attach one to the outlet, and manually open it so that water rushes out of the nozzle of the hose. The quantity and speed of the water is so great that it can knock over the firefighter holding the hose if he is not standing in the correct way. As soon as the fire fighter opens the hydrant, water will gush out, and sensors will detect a drop in pressure in the system. This drop in pressure will trigger the fire pumps to turn on and start pumping water at a tremendous flowrate.
![Fire Fighting System](https://glyptic.abdynamicsolutions.in/wp-content/uploads/2023/06/fire-fighting1.webp)
![Fire Fighting System](https://glyptic.abdynamicsolutions.in/wp-content/uploads/2023/06/fire-fighting2.webp)
A sprinkler is a nozzle attached to a network of pipes, and installed just below the ceiling of a room. Every sprinkler has a small glass bulb with a liquid in it. This bulb normally blocks the flow of water. In a fire, the liquid in the bulb will become hot. It will then expand, and shatter the glass bulb, removing the obstacle and causing water to spray from the sprinkler.
![fire-fighting3-420x336 Sprinkler](https://glyptic.abdynamicsolutions.in/wp-content/uploads/2023/06/fire-fighting3-420x336-1.webp)
The main difference between a hydrant and a sprinkler is that a sprinkler will come on automatically in a fire. A fire hydrant has to be operated manually by trained firefighters – it cannot be operated by laymen. A sprinkler will usually be activated very quickly in a fire – possibly before the fire station has been informed of the fire – and therefore is very effective at putting out a fire in the early stages, before it grows into a large fire. For this reason, a sprinkler system is considered very good at putting out fires before they spread and become unmanageable.
We provide reputed pipe, pump, panel, equipment, devices etc. and having in house expertise to install & commission the system.
![](https://glyptic.abdynamicsolutions.in/wp-content/uploads/2023/06/fire-fighting-4.webp)
![fire-fighting-5](https://glyptic.abdynamicsolutions.in/wp-content/uploads/2023/06/fire-fighting-5.webp)